Regardless of where your well is, you need to supportive services and adequate equipment. From desanding companies in Alberta to desanding companies in Pennsylvania, you should get the services that advance and protect your business. So far so good.

If you look around, chances are you are going to find enough desanding companies in Pennsylvania (or Alberta for that matter) to offer you some services. But do you know exactly what you are looking for? There is a sea of options. How to find the right fit? Take it one step at a time.

First and foremost, you have recognized the need to remove solids from fluids and gas in the extraction process. If this is the case, you need to proceed with choosing the right equipment. When doing so, you must take into consideration not only the functionality of a unit, but also durability and multitude of operations. You probably want to choose the most practical option, therefore you want one unit to perform most functions. You will do well if you chose the products of Specialized Desanders Inc. If you do, you will get:

Wellhead sand removal

This unit can be implemented in an already existing site under sand-producing conditions or in a newly developed site. The core of the operation consists of the wellhead desanding processes. In this process, the unit exploits the rules of physics to make for an easy solution in the purification of fluids and gas. The wellhead desanding changes the velocity of the solution in order to allow fluids and gas to pass through the unit while heavier particulates will fall to the bottom of the unit. Thus, you start with a mixed solution and after the wellhead sand removal you end up getting only the desired part (the oil or gas), without the complications of sand and other solid particulates.

While the process of wellhead sand removal is the most crucial one to get the results, there are many steps between mixed solution and the protection of the equipment. The presence of sand is detrimental to both the integrity of the equipment and the fluid or gas. The passing of sand through the drilling rigs can damage the equipment, however the accumulation of sand in the unit can also prove to be an obstacle to the smoothness of the operation. Therefore, after the sand is separated from the liquid or gas, it needs to be removed from the unit. But how much sand is enough? When does the operator stop drilling and opt for cleanup? You can answer those questions with the use of wellhead sand control equipment. The wellhead sand control equipment monitors the sand deposits in the unit and alerts the operators to the appropriate time for cleaning the unit. The wellhead sand control can be done remotely and it saves time and the costs of unnecessary cleanups.